Connection & Modes explained
Telescope Bridge demonstration video
This short demonstration video shows the Telescope bridge working with telescopes that have an RS232 port, and Sky Safari. Check your telescopes compatibility to see if the Telescope Bridge will work.
Use this mode to connect your telescope to popular apps such as Sky Safari. The Telescope Bridge will create it's own Wifi network so you can connect to it. The display will show you all the information you need to enter in your app to connect.
Just like the access point mode, the telescope bridge can also connect to your home network via your router. To do this the Telescope Bridge will create a portal you can access on your phone or tablet to configure your wifi settings. Once this is done it will be remembered.
You can use Bluetooth mode if you want. Just select this setting and the telescope bridge will create a Bluetooth device you can connect to. The screen will show you the device name and connection status.
The telescope Bridge can be used as a USB serial port connection, great for Stellarum and other great PC/MAC based programs. Features the newer USB-C connection. Just plug and go! You will also need to power the bridge via USB - power bank or computer.
Featres a standard 9 pin DB9 Female port, ready to connect to your telescope's RS232 lead.
Note the lead is not supplied with this unit.
Telescope Bridge can be updated over the air. No more having to use a program or app to update your device. Just enter the update mode and it will all happen automatically. Futreproof!
Find out more about the features and functions...
Use the gudes and information pages below to find out more about this products features and connections etc.
"This is great! Easy to setup and loads of features. I saved loads of money by not having to get a load of seprate modules or connection leads for my LX200GPS."
"Brilliant little device! My Celestron Nexstar now connects flawlessly over WiFi and Bluetooth. Setup was easy, the display shows exactly what you need. Highly recommended!"
"The Telescope Bridge replaced several expensive modules I was looking at. WiFi setup took just a few minutes, and being able to update firmware over the air is a real bonus."
"Super impressed with the Telescope Bridge. I use it with my Skywatcher mount and SkySafari app. Rock solid connection, and the OTA updates work exactly as advertised. It's clear a lot of thought went into this."
"Finally, an easy way to connect my ETX without needing a PhD in serial cables! USB-C connection to my laptop works instantly, and wireless control from my tablet is just as smooth. Great piece of kit."
"Telescope Bridge turned my old Meade mount into a modern, wire-free setup. Fast delivery, clear instructions, and everything worked right out of the box. Saved me a lot of hassle and money!"
