If you have a pre-set WiFi router setup and you wish to change it then press the M button for 2 seconds. This will remove the pre-set and reboot the device into Access point mode. Now goto step 2.
If you have not yet configured a WiFi pre-set Press the M button for 2 seconds. This mode will create a Wifi network called "ScopeBits_connect" and assign an IP address 192.168.4.1.
You will now see this screen.
Connect your mobile device to the WiFi "ScopeBits_connect". Some devices will automatically display the config screen.
Open your device's web browser, enter 192.168.4.1 into the address bar (if your device did not automatically display the page). You will see the following screen. To continue select Configure WiFi
Select the Wifi you want to connect to, or enter it into the SSID field. Enter the password for this WiFi and click Save. If successful your APPSTAR will now reboot and show your selected Wifi on the screen. Now you can connect your apps to your network. APPSTAR will show you connection information on the screen.